Congratulations on your new purchase of a Beeprt  Thermal Label Printer. We designed this printer to simplify your shipping and printing needs!

In the box, you will find the printer, the power adapter cable, a USB cable.

Ensuring that the printer is turned off, connect one end of the power cable into the printer, and plug the other end into an electrical outlet.

Next, connect the USB cable from the printer to your computer. Open the printer by pulling the orange latch on the right-hand side of the device.

Load your labels over the printer, ensuring that the printable side of the labels are facing up. Adjust the orange tabs as needed and close the printer. Next, turn the power switch to ON. Press and hold the button atop the printer until you hear one beep, then let go. The printer will run automatic label identification to identify your label size.

This process only needs to be done once, or if you change your label size. Once the printer has identified the labels, you may tear off the label. Alternatively, you can open the printer, remove the labels, then close the printer and feed them in from the back.

Next setup: